Permanent Magnet Synchronous DC Motor for Water-Jet Loom

Merchandise Description:
 
DC motor is a rotating motor that can transform DC electrical energy into mechanical energy (DC motor) or mechanical strength into DC electric powered vitality (DC generator). It is a motor that can convert DC and mechanical strength into 1 another. When it runs as a motor, it is a direct existing motor, which converts electrical vitality into mechanical vitality when it runs as a generator, it is a immediate existing generator, which converts mechanical power into electrical power.
 

Product Name Everlasting Magnet Synchronous DC Motor for H2o-jet Loom
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The composition of DC motor should consist of two elements: stator and rotor. The static part of DC motor is named stator. The primary purpose of stator is to make magnetic discipline, which is composed of foundation, main magnetic pole, commutation pole, stop cap, bearing and brush system. Working element is called rotor, whose primary function is to create electromagnetic torque and inductive electromotive force. It is the hub of vitality conversion of DC motor. So it is also generally called armature, which is composed of rotor, armature main, armature winding, commutator and supporter.
Product Z Type
Seat quantity Z315-Z1000
energy sixty~2800kW
Voltage 220~1000V
Torque variety 1.5 ~180kNm
Protection level IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Working velocity  Constant Velocity /Lower Pace /Change Pace /High Speed Other 
Main classification DC Motor is a equipment that converts mechanical strength into DC power. It is largely utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power offer of alternator. Although in areas exactly where DC energy is needed, AC energy rectifier is also employed to change AC into DC energy, but from some aspects of efficiency, AC rectifier electricity provide can not fully replace DC generator.  
Application DC motors are extensively employed in tape recorders, video clip recorders, video clip discs, electric powered shavers, hair dryers, digital watches, toys and so on.
Upkeep technique Skilled motor servicing middle motor upkeep method: cleaning stator and rotor – changing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration equilibrium.
1. Use surroundings need to be often dry, motor surface must be stored thoroughly clean, air intake need to not be hindered by dust, fibers and other hurdles.
2. When the thermal defense of the motor carries on to work, it need to be ascertained whether or not the fault arrives from the motor or the overload or the environment worth of the protective unit is way too reduced. After reducing the fault, it can be set into procedure.
three, guarantee that the motor is well lubricated during operation. The basic motor runs for about 5000 hrs, that is to say, lubricating grease must be extra or changed. When bearing overheating or lubricating deterioration is found in procedure, the hydraulic pressure need to alter lubricating grease in time. When changing grease, the previous grease should be taken out, and the oil groove of bearing and bearing include ought to be washed with gasoline. Then ZL-3 lithium grease should be stuffed with one/2 (2 poles) and 2/three (four poles, six poles and eight poles) of the cavity in between the inner and outer rings of the bearing.
4. When the life of the bearing is more than, the vibration and sound of the motor will increase naturally. When the radial clearance of the bearing reaches the subsequent worth, the bearing should be replaced.
5, when taking away the motor, it is Alright to remove the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the enthusiast, it is far more practical to get out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from getting broken.
6. When replacing the windings, the sort, size, turns and gauges of the unique windings have to be recorded. When these data are dropped, they should be acquired from the company and the first developed windings should be altered at will, which frequently deteriorates one particular or numerous overall performance of the motor or even makes it extremely hard to use them.

 

 

Permanent Magnet Synchronous DC Motor for Water-Jet Loom