Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1800-20 2150 1800kv 10kv IP20

I. Overview
The large a few-section synchronous motor for TK collection air compressor is a high-performance collection merchandise specially developed and designed by our company for the load of air compressor.
This sequence of motors adopts new technologies, new supplies, new processes, exquisite materials variety, and advanced producing. It has the attributes of little size, light-weight weight, stunning look, large efficiency, minimal sound, lower vibration, secure and reputable procedure, and convenient use and servicing.

2. Implementation expectations
GB755 Rotating Motor Ranking and Efficiency
Classification of GB/T997 rotary motor composition type, set up variety and junction box placement (IM code)
GB/T1571 Three-section synchronous motor check approach
GB/T1993 Rotating Equipment Cooling Strategy
GB/ Safety class (IP) classification of the total composition of rotating electrical equipment
GB/T10068 The measurement, evaluation and limit of mechanical vibration with a shaft centre top of 56mm and earlier mentioned
GB/T10069 Rotating Device Sound Measurement Strategy and Restrict
JB/T8667.1 CZPT Situations of Huge 3-stage Synchronous Motor Element 1: TK Series
3. Basic complex parameters
Electricity range: 250~10000KW
Rated voltage: 6000, 10000V
Rated velocity: 250, 273, three hundred, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Defense amount: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling strategy: IC01, IC37, IC81W
Set up method: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters according to person demands
Four, specialized characteristics
four.1 The structural design and style is realistic, secure and dependable, and the ability to step out of phase is sturdy.
four.2 The major insulation composition using new insulating resources has large voltage resistance and long motor existence.
four.3 The temperature increase margin is large. The motor adopts F-class insulation, and the temperature increase is assessed in accordance to the temperature rise restrict of the B pole insulation.
4.4 The protection device is superior and total. The stator windings and bearings are equipped with temperature detection units, which can detect, alarm and journey.
four.4.2 Shutdown place heater with anti-condensation result.
four.5 Huge inertia. Motors with distinct moments of inertia can be created according to user requirements.
5, construction variety
5.1 The general construction of this sequence of motors is welded with metal plates for the frame, conclude go over, and base plate. The motor is an independent cavity, and the slip ring can be created with different security amounts according to user requirements.
5.2 Stator: The stator body is welded by steel plate. The motor stator outlet is led out by a large-voltage rubber cable. The outlet situation can be led out from the decrease component of the base or from the major junction box on the facet of the motor.
The stator main is superimposed by low-decline silicon steel sheets, and the core sections are divided by radial ventilation ducts.
The stator winding is F quality insulation, and the temperature rise is assessed according to B grade to support prolong the support life. It adopts VPI all round dipping paint therapy, which has large electrical overall performance, mechanical energy, insulation performance, moisture resistance and thermal stability.
five.3 The rotor magnetic pole main is created of laminated steel plates, and has various constructions these kinds of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is geared up with a fan, which can properly management the temperature rise of the rotor.
5.4 Undertake seat kind spherical sliding bearing. The bearings are insulated to stop shaft currents.
Use new lubricating oil and thin-walled bearing alloy tiles, and established electromagnetic centerline symptoms.
five.five According to person demands, the slip ring can be designed as a good pressure air flow construction to enhance the protection of the motor. The whole duration of the motor with the good pressure ventilation composition of the slip ring is slightly elevated.
6. Circumstances of Use
six.1 Voltage fluctuation: ±5% (It can operate under ±10% below the conditions of 7.three in GB755)
6.2 Frequency fluctuation: ±2%
6.three The altitude does not exceed 1000m
six.4 The highest ambient temperature does not exceed +40ºC, and the least is 0ºC.
Seven, design description

Outer diameter of stator punch (Φ2150mm)

Amount of poles (16 poles)

Rated energy (1250KW)
Three-period synchronous motor for compressor
8. Purchasing guidelines Before placing an buy, you should refer to the item catalog of this sequence to explain the needed product design, requirements and other data. If there is a discrepancy among the requirements and the samples, make sure you speak to our business.
8.two The motor model, rated power, synchronous velocity, rated voltage, rated frequency, protection degree, instant of inertia, rotation route, set up sort, and so on. have to be indicated when purchasing.
8.3 The sample technological information sheet only lists the related information of motors with rated voltages of 6KV and 10KV. If users require other voltage stages, our company can also give relevant technological info when purchasing.
8.four The technical information and dimensions in the sample are only for reference when the consumer selects the model. The official details will be offered by the firm after the deal or technological arrangement is signed.
8.5 If there are any other unique requirements, please provide the specifications and indication the pertinent specialized settlement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1800-20 2150 1800kv 10kv IP20